Addams Family Collection Installation Instructions
The Greed Book
To install the Greed Book mod just take off the 2 lights and slide the book over the plastic on the left hand side. Once in place just put the lights back in. We suggest you use LED lights instead of normal incandescent. LED produce less heat which could cause the mod to warp.
Thing Cart
The Thing Cart is easy to install just take of the 2 lights slide where the bear kick ramp is. Once in place just put the lights back in, you might have to wiggle it a bit to be seated fully. We suggest you use LED lights instead of normal incandescent. LED produce less heat which will prevent heat from distorting the mod.
Antique Phone
This is a phone that slides over the flasher cap in the back of the Addams family Pinball. It replaces the see through plastic, but the you can keep both if you want. This mods slides over the flasher cap, but doesn't obscure the flashers, so you will still see the flashing light. It is a tight fit so gently push it over the flasher cap and you're all set.
The Vault Bookcase Cabinet
The bookcase goes over the blue turn table. Simply remove the bug plastic by taking off the two screws and hold on to them for reinstallation. Slide the bookcase over the blue rectangular part and fasten it with the 2 screws from the bug plastic. If you would like to add the bug plastic back on you might need to use slightly longer screws but the mod looks much better without this.
Greed Book Ramp Switch Cover Set
These are a no brainer when it comes to installation. Just remove the grey (or whatever color you have) vinyl cover and slide over the new one. They should fit snugly over the switches, make sure not to damage the switches when sliding it over.