Since we make a lot of products that integrate with Spooky pinball machine lighting we developed this small connector which makes adding additional lighting elements pretty straight forward. This little board allows you to plug in any 4 pin RGB common anode LED to the game with some simple wiring. Our PMC Spooky LED Splitter has a 4 pin male 2.54 header which accepts the plug from the game. This then outputs the lighting signals to a 4 pin female connection which goes to the original LED in the game and another 4 pin female connection which can be used for any additional lighting you want.
We include a strip of 2.54 headers with each order so you can make your own lighting plug and play. We also offer a few different LED lighting options and sizes which you can wire up to your game in any location or configuration you want. You can get an idea of how these are using in our Rick & Morty Interactive Lit Figures mod or our Interactive Meeseeks mod.
You can add on LED lighting to each board purchased. If you want different bulbs for each board just add one set to your cart for each LED you want. If you want some boards with LEDs and some without, you can add those combinations as well. This splitter will work for any Spooky game which uses the same style of Pinball Life LED lighting boards or any +RGB configuration with 2.54 pins.
It is recommended to only add 1 additional LED per existing LED. The lighting board by Multimorphic which controls the LEDs in the game is able to handle this but is not providing a lot of power to each LED so more than one LED could become an issue.