The Getaway Freeway Sign Installation Instructions

 

1. Mount sign onto switch cover. If your switch cover is missing the rubber boot, you may want to cover it using a cut balloon or simply use a zip tie to secure the sign to it.

2. Route wires into nearest hole.

 

3. Flip up playfield so you can access the PCB that is near the hole.

4. Clip the alligator clips onto the PCB board as shown, making sure that the clips touch the metal parts of the PCB. The LEDs can take 6.3V max which is the majority of GI/arrows on the board. (Caution: Do not connect it to a 12V flasher, it will burn out the LEDs).